TEMPERATURE, PRESSURE, HUMIDITY SENSORS AND TRANSMITTERS
In order to ensure the optimization of processes in HVAC systems, in our assortment you will find a duct, contact, room and outside sensors and transmitters to measure temperature, pressure and humidity. Used in production high-quality components characterized by durability and reliability ensure the proper functioning of the sensor, even in the harshest conditions.
Universal duct temperature sensors with resistive sensing element Pt100 / Pt1000 / NTC 10k or digital sensing element DS18B20.
measuring element Pt100 / Pt1000 / NTC 10k / DS18B20
probe material – aluminum
dimensions: 65 x 40 x 30 mm
probe length: 190 mm
probe diameter: 10mm
degree of protection: IP65
Universal outside temperature sensors with resistive sensing element Pt100 / Pt1000 / NTC 10k or digital sensing element DS18B20.
measuring element Pt100 / Pt1000 / NTC 10k / DS18B20
probe material – aluminum
dimensions: 65 x 40 x 30 mm
probe length: 40 mm
probe diameter: 10mm
degree of protection: IP65
Contact temperature sensors with resistive sensing element Pt100 / Pt1000 / NTC 10k or digital sensing element DS18B20 are universal elements of air-conditioning and ventilation systems. These sensors due to the highest quality and high resistance to adverse environmental conditions are characterized by reliability and accuracy of measurements.
measuring element Pt100 / Pt1000 / NTC 10k / DS18B20
dimensions: Φ9 x 65mm
cable length: 2 m
probe diameter: 10mm
operating temperature: -40 ... 80 ° C
degree of protection: IP65
Universal room temperature sensors with resistive sensing element Pt100 / Pt1000 / NTC 10k or digital sensing element DS18B20.
measuring element Pt100 / Pt1000 / NTC 10k / DS18B20
dimensions: 74 x 74 x 26 mm
degree of protection: IP20
Universal pressure sensor with output 0-10 V.
dimensions: 95 x 104 x 55 mm
pressure measurement in the range of:
EL-PSa-0.5: 0..500 Pa
EL-PSa-1: 0..1 kPa
EL-PSa-2.5: 0..2.5 kPa
EL-PSa-7: 0..7 kPa
supply voltage: 24 V AC/DC
output (voltage 0-10 V)
operating temperature -20...50 °C
built-in LED indicator and calibration button
degree of protection IP 55
Duct humidity and temperature transmitter with independent digital output RS-485 and analog output. The communication link can operate in Modbus or BACnet. The measurement of relative and absolute humidity due to two integrated transducers positioned at the same point. Two independent temperature measurement systems raise the precision and reliability of the control system.
supply voltage: 24 V AC/DC
temperature measurement range: -20..70°C
humidity measurement range: 0 .. 100 %RH
communication port RS-485 (Modbus or BACnet)
dimensions: 140 x 97 x 43 mm (without measuring lance)
The AC transmitter EL-CUR-10M-5/50 is used to measure the AC current. It is used in automation systems, in which control of the value of the current flowing in the low voltage circuit is very important such as: measurement of motor current. The transmitter has a voltage output with 0 - 10V. The system requires a supply voltage with 24V AC or DC.
supply voltage: 24 V AC/DC
current range: 5 - 50 A
power consumption: 2 VA
output (voltage 0-10 V)
the maximum cable diameter: 10mm
mounting: DIN rail
DID YOU NOT FIND INTERESTING INFORMATION ON THE WEBSITE OR DO YOU HAVE QUESTIONS REGARDING OUR AUTOMATION? CALL US !
Copyright © 2021 EL-Piast Sp. z o.o. ǀ Contact